Bullhorn - 180 Degree Double Adapter - 2 Light Bullhorn Light Pole Adapter for Slip Fit - Dual Tenon Adapter 2-3/8 inch

Eagle Star LED Double 180’ Horizontal Tenon Adaptor
Eagle Star LED Double 180’ Horizontal Tenon Adaptor
Eagle Star LED Double 180’ Horizontal Tenon Adaptor
Eagle Star LED Double 180’ Horizontal Tenon Adaptor
Eagle Star LED Double 180’ Horizontal Tenon Adaptor
Eagle Star LED Double 180’ Horizontal Tenon Adaptor

Bullhorn - 180 Degree Double Adapter - 2 Light Bullhorn Light Pole Adapter for Slip Fit - Dual Tenon Adapter 2-3/8 inch

No review yet. Write Review
$120.00 $109.70

Vendor : Eagle Star LED

Sku : ES-BHP-180D2

In Stock   Free Shipping(Only USA)
Shipping all over the world

Slip Fitter
-
+
InStock Agotado
Eagle Star LED security

Double 180’ Horizontal Tenon Adaptor

* Bull horn mounting bracket Covert single tenon to dual tenon with 180 Degree Double tenons slip-fitter adapter for the round light pole to install two LED parking lot light fixtures. 

* Designed to fit any of our slip-fit parking lot lights.  By going with a slip-fit mount you have full adjustability.  Side to side and up and down adjustments. 

* Heavy-duty aluminum design with double-strength welds ensures the bracket lasts the test of time. Protective paint ensures finish. Does not include hardware. Please ensure you are purchasing bolts strong enough to secure a heavy bracket and heavy light.

* The bracket is easy to install. Run the wiring through and secure to pole (hardware not included). Wire the light and then slide the light over the adapter. Rotate the light where you need it and secure the slip fit to the bracket. Adjust the light both up and down and then tighten down. Double-check all bolts and perform a safety check

Tenon Dimension: 2-3/8″ Outer Diameter     Fit less than 3″ light pole 

Finish: Dark Bronze

Package: 1PC/CASE   35.43*17.72*7.10/38.3 LB


Questions

Q1: Can I use this standard bullhorn if my pole O.D. is larger than 3″?

If the round light pole is larger than 3″, we recommend using a tenon adapter(round to round) first, then use this bull horn bracket covering at the top of the adapter. Or if your pole's internal diameter is larger than 3″, you can insert our bullhorn into your light pole and use the screws to hold tightly. 

Q2: I don’t want to increase the mounting height, but I need to install two light

Fixtures on poles throwing more lumens forward to my tennis court, do you have any idea on how to achieve this? 

Yes, you can use our horizontal bullhorn bracket adapter, see picture below, then the mounting height is unchanged but the light is more forward to the illumination area you want 

For more light pole adapter accessories, pls check the catalog here. 

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)